epoxy floor paint cold setting

It's a common scenario; a chiller room at 0°C needs coating with a floor paint but can't be switched off to allow the temperature to increase to 10°C+. A conventional epoxy paint will actually not set at such a temperature, remaining wet for days, weeks if not permanently (depends on the formulation).

ACM has the answer to this problem. We offer ACM Epoxicote Cold Set, a special formulation which can be applied at 0°C yet still cure after 24 hours. This product is available in Light Grey, Tile Red and Mid Green in 4.5kg quantities which covers 12-18sq.m depending on temperature - the product is thicker at 0°C than at 6°C. Once cured the product can actually withstand temperatures down to -10°C.

The ACM Epoxicote data sheet covers the application and performance criteria of the product, the only difference being a different hardener is used for the cold set grade. Please specify on an order ACM Epoxicote Cold Cure to make sure you receive the right product.

For further information please call 01928 515787 or click the image below to visit the ACM website.