Floor paint specification for heavy industrial traffic

Herewith a standard specification for installation of a floor coating system suitable to accept industrial forklift traffic. Anticipated wear life is 2-3 years.

1) The substrate should be mechanically prepared or have an open textured surface. The subfloor should be free of contamination and be of sound construction.

2) Apply a coat of ACM Epoxy Dustproofer/Sealer by roller and allow to dry.

3) Apply a second coat of ACM Epoxy Dustproofer/Sealer and allow to dry.

This system will be suitable for foot traffic after overnight cure and full industrial traffic after two to three days cure at temperatures of 15°C plus. Leave the floor for 7 full days before exposing to chemicals.

Advantages

Solvent free and non-tainting. Tremendous value when calculating cost versus wear life in comparison to competitive products.

Disadvantages

None.

Please view the product data sheet for the products by clicking on the links above.

Click the picture below for the home page of the website to view all the products ACM manufacture or call 01928 515787 for information.