ACM Concrete Floor Paint

	An extremely low cost and easy to use fast drying concrete floor paint which produces a tough, attractive and readily cleaned finish for industrial premises.

	Advantages: ACM CONCRETE FLOOR PAINT will bond to most clean and dry surfaces, including concrete, steel and timber. No mixing is required and unused material may be stored. Aisle and other area designation is frequently undertaken and a most impressive effect can be created.

	Colours Available: See the colour chart on the left. White is also available.


	Pack Size/Coverage: 5 litre tins, covering approximately 40 sq. m. per coat. Two coats are normally applied.

	Surface preparation: Prepare new concrete (minimum 28 days), hardened or mildly dusty (laitence) floors with Floorsaver Etching Fluid. Oily areas should be treated with Floorsaver Degreaser.

	Application Procedure: Stir the paint thoroughly and apply by roller or brush. The second coat should be applied as soon as possible after the first coat has dried.

	Note: Do not traffic until the paint is dry throughout. Use ACM EPOXY DUSTPROOFER/SEALER for areas subjected to severe usage. Please refer to ACM for guidance.

	Health and Safety Data: Supplied upon request.

	Technical Service: A full application and advisory service is available.