MATERIAL SAFETY DATA SHEET

ADVANCED CONSTRUCTION MATERIALS LIMITED
The Heath Business and Technical Park
Runcorn. WA7 4QX
Tel: 01928 515787
Fax: 01928 515791
Email: info@acml.co.uk
Website: www.acml.co.uk

1 PRODUCT NAME: Pourable industrial Flooring - Powder

2 CHEMICAL COMPOSITION:
• Portland cement / sand blend with additives

CAS No. Wt% Symbol R Phrases

OPC 659971-15-1 25% Xi 36/37/38, 41
3 HAZARDS IDENTIFICATION: Contact with wet or dry product may cause irritation or dermatitis.
Airborne dust from product is irritating to eyes and respiratory system.

4 FIRST AID MEASURES:
4.1 General Advice: Product is alkaline. Wash thoroughly with water.
4.2 Inhalation: Remove patient to fresh air. If nose or airways become blocked seek medical
advice.
4.3 Eye Contact: Wash immediately with plenty of clean water. Seek medical advice.
4.4 Skin Contact: Wash thoroughly with soap and water.
4.5 Ingestion: Do not induce vomiting. Wash mouth with water and give plenty of water to
drink.

5 FIRE PRECAUTIONS: Not flammable - no special precautions

5.1 Extinguishing Media: Any
5.2 Extinguishing Media NOT to be used: None
5.3 Product Combustion Hazards: -
5.4 Special Protective Equipment for Firefighters: -

6 SPILLAGE:

6.1 Personal Precautions: General protective clothing with eye / face protection. Wear dust
mask if airborne dust suspected.
6.2 Environmental Precautions: -
6.3 Removal of Spillage: Remove in dry state if possible. Addition of water will eventually
render the product in a solid state.
6.4 Further Advice: -

7 HANDLING & STORAGE:
7.1 Safe Handling: Gloves, overalls, eye / face protection. Use dust mask in breezy conditions.
7.2 Safe Storage: Store in a cool, dry place in closed conditions.

8 PERSONAL PROTECTION:
8.1 Respiratory Protection: Dust mask if risk of airborne dust.
8.2 Hand Protection: Heavy duty gloves. Seek advice from glove suppliers and follow
their instructions.
8.3 Eye Protection: Eye / face shield or safety spectacles.
Skin Protection: Overalls, closed footwear.

POURABLE INDUSTRIAL FLOORING - POWDER

9 PHYSICAL & CHEMICAL PROPERTIES:
9.1 Appearance: Powder
9.2 Odour: -
9.3 Colour: Grey
9.4 Boiling Point/Range: -
Flash Point: -
Auto Ignition Temp: -
Oxidising Properties: -
Relative Density: -
Melting Point/Range: -
Flammability(solid, gas): -
Explosive Limits: -
Vapour Pressure: -
Water Solubility: -
Other Data: -
Solvent Content: Nil

10 STABILITY & REACTIVITY:
10.1 Conditions to avoid: Acids
10.2 Materials to avoid: None
10.3 Hazardous Decomposition Products: -

11 TOXICOLOGICAL INFORMATION: Low toxicity
11.1 Toxicity: LD50 Oral: }
LD50 Skin: }
Skin Irritation: } No data
Sensitisation: } available
Inhalation: }
Recommended Exposure Limit: 8hr TWA: total inhalable dust 10mg/m3
8hr TWA: respirable dust 4mg/m3

12 ECOLOGICAL INFORMATION: No data. Addition to water will cause pH to rise.

13 SAFE DISPOSAL:
13.1 Product: Not classified as hazardous waste
13.2 Container: Not hazardous waste

14 TRANSPORT INFORMATION: Not classified as hazardous for transport

15 REGULATORY INFORMATION: IRRITANT Xi
R phrases
41: Risk of serious damage to eyes.
-: Contact with the wet product may cause irritation or dermatitis.
-: Contact between the dry product and body fluids (e.g. sweat or eye fluid) may cause irritation
or dermatitis.
S phrases
2: Keep out of the reach of children.
26: In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
28: After contact with skin, wash immediately with plenty of soap and water.
36/37/39: Wear suitable protective clothing, gloves and eye / face protection.
Other Data:

16 OTHER INFORMATION: Contains Portland Cement.

Contains less than 2ppm of Cr VI by weight of cement when used within
the specified shelf life.

1 PRODUCT NAME: Pourable Industrial Flooring Resin Additive/Primer

2 CHEMICAL COMPOSITION:
• Carboxylated styrene butadiene latex

CAS No. Wt% Symbol R Phrases


3 HAZARDS IDENTIFICATION: May cause slight eye irritation.

4 FIRST AID MEASURES:
4.1 General Advice: Do not allow product to dry on the skin.
4.2 Inhalation: Remove patient to fresh air and seek medical attention if patient does not
recover quickly.
4.3 Eye Contact: Wash with plenty of clean water. Seek medical advice if symptoms persist.
4.4 Skin Contact: Wash with soap and water.
4.5 Ingestion: Give plenty of water to drink. Seek medical attention if nausea persists.

5 FIRE PRECAUTIONS:
5.1 Extinguishing Media: Any
5.2 Extinguishing Media NOT to be used: None
5.3 Product Combustion Hazards: Acrid smoke
5.4 Special Protective Equipment for Firefighters: Breathing apparatus

6 SPILLAGE:
6.1 Personal Precautions: Wear waterproof overalls and footwear.
6.2 Environmental Precautions: Do not allow to enter drains or water courses.
6.3 Removal of Spillage: Absorb in dry earth or sand. Transfer to suitable containers for
disposal.
6.4 Further Advice: -

7 HANDLING & STORAGE:
7.1 Safe Handling: Ensure adequate ventilation.
7.2 Safe Storage: Store in a cool, dry area.

8 PERSONAL PROTECTION:
8.1 Respiratory Protection: Good ventilation.
8.2 Hand Protection: Impermeable gloves.
8.3 Eye Protection: Safety glasses recommended.
8.4 Skin Protection: Overalls with long sleeves.

9 PHYSICAL & CHEMICAL PROPERTIES:
9.1 Appearance: Cloudy white liquid
9.2 Odour: Faint aromatic
9.3 Colour: Off white
9.4 Boiling Point/Range: Approx. 100 C
Flash Point: -
Auto Ignition Temp: -
Oxidising Properties: -
Relative Density: Approx. 1.0
Melting Point/Range: -
Flammability(solid, gas): -
Explosive Limits: -
Vapour Pressure: As water
Water Solubility: Miscible
Other Data: -
Solvent Content: Nil

POURABLE INDUSTRIAL FLOORING – RESIN ADDITIVE

10 STABILITY & REACTIVITY: Stable under all normal conditions
10.1 Conditions to avoid: -

10.2 Materials to avoid: -

10.3 Hazardous Decomposition Products: -

11 TOXICOLOGICAL INFORMATION: Available data indicates low toxicity
11.1 Toxicity: LD50 Oral: -
LD50 Skin: -
Skin Irritation: -
Sensitisation: -
Inhalation: -
Recommended Exposure Limit: -

12 ECOLOGICAL INFORMATION: Will degrade only slowly in the environment.
May be harmful to fish and aquatic life in large amounts.

13 SAFE DISPOSAL:
13.1 Product: Do not discharge to drains. Landfill or incineration according to local and
national regulations.
13.2 Container: Allow to dry and dispose of as non-hazardous.

14 TRANSPORT INFORMATION: Not classified as hazardous for transport
Hazard Class: UN No:
Packing Group: Flash Point:
ADR Class: Item:
Technical Name:

15 REGULATORY INFORMATION: Not classified as hazardous for transport

R phrases

S phrases

Other Data:

16 OTHER INFORMATION: -