View the
Tremco Flooring Brochure
(1.6meg)
The Story Of A Floor
This 1200 square metre old floor was worn, damaged, dirty and oil contaminated after many years regular use. The remedial specification involved shotblasting and hot compressed air burning to remove the contamination, followed by two coats of TremcoPenetrating Epoxy Primer.
After the primer had cured overnight, 6mm thickness of Tremco Pumpable Floor Screed Px-1 was applied by pump. Half of the floor area was covered in only 2 hours.
After overnight cure the floor was hard and suitable for pedestrian and vehicle traffic.
Although not always necessary, the customer chose to have the screed painted with the highly durable Tremco Epoxicote system. The resulting floor is smooth, very hard wearing and easily cleaned.
Due to storage capacity constraints the customer required the area to be treated in two halves. The difference between before and after is remarkable as seen in the photo. The project was completed exactly to requirements.
Another happy Tremco customer!
