MATERIAL SAFETY DATA SHEET
ADVANCED
CONSTRUCTION MATERIALS LIMITED
Runcorn. WA7 4QX
Tel: 01928 515787
Fax: 01928 515791
Email:
info@acml.co.uk
Website:
www.acml.co.uk
1
PRODUCT NAME:
Silicone Waterproofer Wx-4
2
CHEMICAL COMPOSITION:
Silicone resin solution in white spirit
CAS No. Wt%
Symbol R Phrases
Naphtha
(Petroleum) 6472-82-1 >50% Xn, N 10, 65, 66, 51/53
Hydro
Desulphurised Heavy
(White
Spirit)
Silicone
resin Not classified as hazardous
3
HAZARDS IDENTIFICATION: Flammable. Harmful if
swallowed. Toxic to aquatic organisms.
Repeated
skin contact may cause drying and cracking.
4
FIRST AID MEASURES:
4.1
General Advice: Remove contaminated clothing. Launder before re-use.
4.2
Inhalation: Remove patient to fresh air.
4.3
Eye Contact: Rinse with copious amounts of water and seek immediate attention.
4.4
Skin Contact: Use proprietary skin cleansers, or plenty of soap and water.
4.5
Ingestion: Rinse out mouth with water. Do not induce vomiting. Give water to
drink and seek immediate medical attention.
5
FIRE PRECAUTIONS:
5.1
Extinguishing Media: Carbon dioxide, foam, dry chemical.
5.2
Extinguishing Media NOT to be used: Water jet.
5.3
Product Combustion Hazards: Explosive vapours in air.
5.4
Special Protective Equipment for Firefighters: Air fed respirator in enclosed
spaces and protective gloves.
6 SPILLAGE:
6.1
Personal Precautions: Remove all sources of ignition, ensure good ventilation.
Wear suitable protective clothing and eye protection.
6.2
Environmental Precautions: Do not allow to enter drains or open water courses.
6.3
Removal of Spillage: Absorb in dry earth or sand. Transfer to suitable
containers for disposal.
6.4
Further Advice: -
7
HANDLING & STORAGE:
7.1
Safe Handling: Avoid sources of ignition. Wear suitable protective clothing.
7.2
Safe Storage: Store in a cool, dry, well ventilated area. Keep out of reach of
children.
8
PERSONAL PROTECTION:
8.1
Respiratory Protection: Air fed respiratory mask in enclosed spaces.
8.2
Hand Protection: Solvent resistant gloves. Seek advice from glove supplier and
follow their advice.
8.3
Eye Protection: Safety glasses.
8.4
Skin Protection: Long sleeved clothing or overalls.
9
PHYSICAL & CHEMICAL PROPERTIES:
9.1
Appearance: Liquid
9.2
Odour: Hydrocarbon
9.3
Colour: Almost colourless
9.4
Boiling Point/Range: 150 C - 200 C
Flash
Point: Over 36 C
Auto
Ignition Temp: 230 C
Oxidising
Properties: None
Relative
Density: Approx. 0.78
Melting
Point/Range: -
Flammability(solid,
gas): -
Explosive
Limits: 0.9% - 8.0% vapour in air
Vapour
Pressure: -
Water
Solubility: Insoluble
Other
Data: -
Solvent
Content: >50%
10
STABILITY & REACTIVITY:
10.1
Conditions to avoid: Stable in normal storage.
10.2
Materials to avoid: Avoid strong oxidising agents. Will etch glass.
10.3
Hazardous Decomposition Products: On burning: CO, carbon dioxide, black smoke.
11
TOXICOLOGICAL INFORMATION:
11.1
Toxicity: LD50 Oral: }
LD50
Skin: } No data
Skin
Irritation: } available
Sensitisation:
}
Inhalation:
}
Recommended
Exposure Limit: 8hr TWA 100ppm.
12
ECOLOGICAL INFORMATION: Toxic to aquatic organisms.
Solids not readily biodegradable,
solvent
vaporises.
13
SAFE DISPOSAL:
13.1
Product: (See also 6.3) Dispose according to local and national regulations.
13.2
Container: Allow to dry and dispose of in accordance with local and national
regulations, as normal waste.
14
TRANSPORT INFORMATION:
Flash
point over 36° C
UN
1263 Paint related material Class 3 P/G III ADR
UN
1263 Paint related material Class 3 P/G III IMDG MARINE POLLUTANT.
15
REGULATORY INFORMATION: FLAMMABLE, HARMFUL Xn N
R phrases
10:
Flammable.
51/53:
Toxic to aquatic organisms, may cause long term effects in the aquatic
environment.
65:
Harmful. May cause lung damage if swallowed.
66:
Repeated exposure may cause skin dryness or cracking.
S phrases
2:
Keep out of the reach of children.
23:
Do not breathe fumes.
24:
Avoid contact with skin.
29:
Do not empty into drains.
51:
Use only in well ventilated areas.
62:
If swallowed do not induce vomiting - seek medical advice immediately and show
the container or label.
16
OTHER INFORMATION: -
Not
intended for application by spray. However, if sprayed, appropriate face masks
and other protection may be required.